Reference Data For Installation; Current Consumption And Inrush Current; Storage Capacity For Recorded Data; Number Of Cameras - Sony NSR-500 Série Manuel D'installation

This connector can only be used when
an NSBK-DH05 (optional) is mounted.
N Analog camera cable input connector
Use this connector to connect the analog
camera input cable.
This connector can only be used when
an NSBK-EB05 (optional) is mounted.
CAUTION
When you connect the analog camera
input cable of the unit to peripheral
device, use the supplied cable to prevent
malfunction due to radiation noise.
Reference Data
for Installation
Current Consumption and
Inrush Current
Model AC input
voltage
100 V
NSR-
500:12
230 V
Storage Capacity for
Recorded Data
You can confirm the configurations and the
hard disk drive capacity of the NSR
clicking [Information] in the Logon screen,
and viewing the Information screen that
appears. You can also confirm the actual
2)
storage capacity to which data can be
recorded in the [Storage] tab of the Server
screen.
1) Capacities for hard disk drives are
approximations based on the following
equation for 1 GB: 1,000 × 1,000 × 1,000 =
1,000,000,000 bytes
2) Storage capacities are approximations based
on the following equation for 1 GB: 1,024 ×
1,024 × 1,024 = 1,073,740,000 bytes

Number of Cameras

At the time of purchase, the maximum
number of cameras that can be registered is
16.
Installing the optional NSBK-CL05
increases the maximum number of cameras
that can be registered to 24.

Reference Data for Installation

Full Inrush
loading current
0.57 A
11 A
0.34 A
1)
by
17