System Requirements - Sony NSR-500 Série Manuel D'installation

System
Requirements
The hardware required in order to use this
unit are as follows.
1)
• Monitor
• Sony network cameras
3)
cameras
4)
• USB keyboard
5)
• USB mouse
• Network hub
• 1000Base-T/100Base-TX/10Base-T
cable
• USB flash memory device
1) Computer displays that accept RGB input are
supported.
The supported resolutions are as follows.
- Full High-Definition (1,920 × 1,080)
- WUXGA (1,920 × 1,200)
- Full Wide XGA (1,360 × 768)
- UXGA (1,600 × 1,200)
- SXGA (1,280 × 1,024)
- XGA (1,024 × 768)
When NSBK-DH05 (optional) is
mounted
HDMI-compatible devices and computer
displays that accept RGB input are supported.
The supported resolutions are as follows.
- Full High-Definition (1,920 × 1,080)
- WUXGA (1,920 × 1,200)
- Full Wide XGA (1,360 × 768)
- UXGA (1,600 × 1,200)
- SXGA (1,280 × 1,024)
- XGA (1,024 × 768)
However, WUXGA is not supported on
HDMI-compatible devices.
2) Contact your dealer for details about
compatible Sony network cameras.
3) The NSR requires an NSBK-EB05 (optional)
expansion.
4) Use a USB keyboard with a cable. However,
keys other than the standard may not function.
Wireless or infrared USB keyboards may also
not function properly.
5) Use a USB mouse with a cable. Wireless or
infrared USB mice may not function properly.
Functions such as three-button and wheel
operations may also function improperly.
2)
or Sony analog
6)
6) Required when backing up system
information such as logs.
- This unit supports USB 2.0, Mass Storage
class devices. However, it does not support
USB 2.0, Mass Storage class HDDs or CD/
DVD drives. Do not connect mass storage
class devices other than USB memory
devices to the unit. Be aware that errors may
still occur when writing data to a USB 2.0,
Mass Storage class memory device,
depending on the type of device used. If
errors occur when writing data, use a USB
flash memory device of a different type.

System Requirements

11