Sony NSR-500 Série Manuel D'installation page 27

r
Select the resolution of the monitor
connected to the unit, and click [Next].
If you select [Auto], the maximum
resolution of the connected monitor will be
detected and selected automatically.
The maximum resolution will also be
detected and selected automatically if the
connected monitor does not support the
resolution you select.
r
Select the audio output connector to use,
and click [Next].
When using audio output from an HDMI
monitor, select [HDMI]. ([HDMI] can only
be selected when an optional NSBK-DH05
is installed.)
r
Set the server name, and click [Next].
r
Configure analog camera connection
settings, and click [Next].
Select the serial transmission standard with
which the camera you want to control will
be connected, and configure settings such
as baud rate and parity bits.
(This screen only appears when an optional
NSBK-EB05 is installed.)
r
Select the video format for the analog
cameras to be connected, and click [Next].
(This screen only appears when an optional
NSBK-EB05 is installed.)
Step 3: Settings 27