Din Rear-Mount: Installation Using The Screw - Pioneer AVIC-90DVD Manuel D'installation

Installation
DIN Rear-mount: Installation using the screw holes on the side of the unit
• Fastening the unit to the factory radio mounting bracket.
Select a position where the screw holes of the bracket and
the screw holes of the head unit become aligned (are fit-
ted), and tighten the screws at 2 places on each side.
Use either binding screws (5 × 6 mm) or flush surface
screws (5 × 6 mm), depending on the shape of the screw
.
holes in the bracket
Screw
Dashboard or Console
Mounting bracket
21