CAUTION
• Install with the left and right sides of the DVD Navigation Unit perpendicular
or parallel to your car's direction of travel. Do not install diagonally to your
car's direction of travel or the current location will be displayed incorrectly.
• If you install the left and right sides of the DVD Navigation Unit parallel to
your car's direction of travel, switch the installation direction lever, and
attach the locking screw to the "
DVD Navigation Unit will not operate correctly.
Forward / Backward
direction of car
Front
Front
(Perpendicular)
Attachment
position of the
↕
locking screw
If you install with the left and right sides of the DVD Navigation Unit parallel to
your car's forward / backward direction
If you install with the left and right sides of the DVD Navigation Unit parallel to your car's
forward / backward direction, remove the mounting screw underneath the DVD
Navigation Unit, and switch the installation direction lever. Then change the screw mount-
ing position from "↔" side to "↕" side. If the screw is attached to the "↔" side, the G sen-
sor mounted in the DVD Navigation Unit will not operate correctly.
1. Remove the locking screw attached to the installation direction lever.
2. Switch the lever, and attach the mounting screw to the "↔" side.
Locking screw
Installation direction lever
↔
" side, or else the G sensor mounted in the
Forward / Backward
direction of car
Front
(Parallel)
Attachment
position of the
↔
locking screw
Underneath the DVD Navigation Unit
Forward / Backward
direction of car
Front
Front
Locking screw
Installation direction lever
18