Mechanical Installation - Hach SC1500 Manuel D'utilisation

Figure 2 Product components
1 sc1500 controller
2 Strain relief fittings (quantity varies)
Section 3 Installation

3.1 Mechanical installation

3.1.1 Install the controller
Attach the controller upright and level on a flat, vertical surface. Refer to the illustrated steps in
Figure 3. Install the controller in a location where the power disconnect device for the controller is
easily operated.
Mounting hardware is supplied by the user. Make sure that the wall mounting is able to hold 4 times
the weight of the equipment.
As an alternative, attach the instrument to a panel, vertical pole or horizontal pole. Refer to the
instruction sheet supplied with the optional mounting kit.
Note: The optional sunshield is recommended for all outdoor installations.
2
The pole mounting hardware is for a 40 mm (1.57 in.) diameter pole.
3 Pole mounting hardware for USB box
2
English 7