Mounting The Loop Handle - Stihl FS 55 Notice D'emploi

Attaching the control handle
11
10
8
9
4
N Unscrew bolt (8) with a combination
wrench or Allen wrench – the nut (9)
remains in the control handle (10)
N Push the control handle with the
throttle trigger (11) facing toward
the gearbox onto the handlebar (4)
until the holes (12) align
N
Screw in the bolt (8) and tighten up
Fasten the throttle cable
Do not kink the throttle cable or
run it in tight radiuses – the
throttle trigger must move freely!
FS 55, FS 55 C, FS 55 R, FS 55 RC
N Press throttle cable (13) into the
throttle cable support (14)
12
12
13
14
14
13

Mounting the Loop Handle

Loop handle with barrier bar
2
1
N Fit the square nuts (1) in the barrier
bar (2); the holes must line up.
English
1
13