Argos Technologies RotoFlex R2000 Manuel De L'utilisateur page 5

Changing Rotisseries
1. Firmly grasp the RotoFlex rotator with your left hand while holding the rotisserie
axle with your right hand. Gently pull the rotator body with your left hand outward
until the axle is free of the unit.
2. Remove the opposite side of the axle body by pulling it gently from the RotoFlex
housing.
3. Select the rotisserie you wish to utilize and mount them on the RotoFlex axle.
4. Insert the axle back into the RotoFlex housing and turn until the axle clicks into
place.
5. Gently pull the rotator body (as in step 1) and reinsert the axle.
6. Turn the unit on to allow the rotisserie axle to align with the RotoFlex motor.
Argos Technologies RotoFlex
4
Tube Rotator — Operator's Manual
™