Argos Technologies RotoFlex R2000 Manuel De L'utilisateur page 4

Argos Technologies RotoFlex
Specifications
Model
Rotation Speed
Capacity
Ambient
Temperature
Speed Control
Max Load
W x D x H (cm)
Power
Noise Level
Weight
Certifications
This device complies with RoHS 2009/95/EC
Operating Instructions
1. Make sure the power switch is turned off before connecting the plug to a grounded
wall socket.
2. Place the RotoFlex on a level, horizontal and secure surface.
3. Select the rotisserie required for your application (see page 4) for rotisserie
installation.
4. Load the tubes and adjust the rotisserie to the desired angle. Be sure to distribute
tubes evenly to acheive a smooth rotating motion.
5. Start the rotator by pushing down the power switch.
6. When finished, turn the power switch off before removing tubes.
Note: You can change the rotation direction by pushing the rotisserie in the opposite
direction.
Caution: Do not touch plug with wet hands or use the device near a water source.
Tube Rotator — Operator's Manual
™
R2000
22rpm
42 x 0.5-0.8mL tubes / 30 x 1.5-2.0mL tubes / 14 x
5-7mL tubes / 14 x 10-15mL tubes / 6 x 50mL tubes
4°C to 60°C 20-85% RH non-condensing
Fixed
1.8lb / 0.8kg (Comprise Rotisseries)
22.5 x 15.4 x 19.5
110 V 60 Hz
Noisless Operation
1.8 lb / 0.8kg
CE Marked
3
R2001
18rpm
220 V 50Hz