Operating Without Connecting To A Tv - Sony STR-DA1800ES Mode D'emploi

x Auto Standby
Lets you set the receiver switch to standby
mode automatically when you do not operate
the receiver or when there is no signals input to
the receiver.
• ON: Switches to standby mode after
approximately 30 minutes.
• OFF: Does not switch to standby mode.
Notes
• This function does not work in the following cases.
– "FM TUNER", "AM TUNER", "HOME
NETWORK", "AirPlay" or "SEN" input is
selected.
– PARTY STREAMING function is being used.
– The software of the receiver is being updated.
• If you use the Auto standby mode and the Sleep
Timer at the same time, the Sleep Timer has
priority.
Operating without
connecting to a TV
You can operate this receiver using the display
panel even if the TV is not connected to the
receiver.
AMP
DISPLAY
RETURN/
EXIT O
US
108
Using the menu on the display
panel
Press GUI MODE repeatedly to
select "GUI OFF".
The receiver is switched to front panel display
mode.
1
2
3
4
5
To return to the previous
display
Press B or RETURN/EXIT O.
To exit the menu
Press MENU.
Note
Some parameters and settings may appear dimmed
on the display panel. This means that they are either
unavailable or fixed and unchangeable.
GUI MODE
V/v/B/b,
MENU
Press AMP.
Press MENU.
Press V/v repeatedly to select
the menu you want, then press
or b.
Press V/v repeatedly to select
the parameter you want to
adjust, then press
Press V/v repeatedly to select
the setting you want, then
press .
or b.