Service; Importer; Disposal - Parkside PFS 710 D3 Traduction Des Instructions D'origine

You can download these instructions
along with many other manuals,
product videos and installation
software at www .lidl-service .com .
This QR code will take you directly to the Lidl
service page (www .lidl-service .com) where you
can open your operating instructions by entering
the item number (IAN) 352048_2007 .
WARNING!
► Have the power tool repaired by the service
centre or a qualified electrician and only using
genuine replacement parts. This will ensure
that the safety of the appliance is maintained .
► If the mains cable is damaged, it must be
replaced with a special cable that is
available from the manufacturer or its
customer service.
NOTE
► Replacement parts not listed (such as carbon
brushes, switch) can be ordered via our
service hotline .

Service

Service Great Britain
Tel .: 0800 404 7657
E-Mail: kompernass@lidl .co .uk
Service Ireland
Tel .: 1890 930 034
(0,08 EUR/Min ., (peak))
(0,06 EUR/Min ., (off peak))
E-Mail: kompernass@lidl .ie
IAN 352048_2007

Importer

Please note that the following address is not the
service address . Please use the service address
provided in the operating instructions .
KOMPERNASS HANDELS GMBH
BURGSTRASSE 21 · 44867 BOCHUM
GERMANY · www .kompernass .com
PFS 710 D3

Disposal

The packaging is made from environ-
mentally friendly material and can be
disposed of at your local recycling
plant .
Do not dispose of power tools in
your normal domestic waste!
In accordance with European Directive
2012/19/EU on Waste Electrical and
Electronic Equipment and its integration into
national law, used power tools must be disposed of
separately and recycled in an environmentally
friendly manner . Take the appliance to a nearby
collection facility .
Your local community or municipal authorities can
provide information on how to dispose of the
appliance .
Dispose of the packaging in an envi-
ronmentally friendly manner . Note
the labelling on the packaging and
separate the packaging material
components for disposal if necessary . The packag-
ing material is labelled with abbreviations (a) and
numbers (b) with the following meanings:
1–7: plastics, 20–22: paper and cardboard,
80–98: composites .
Your local community or municipal
authorities can provide information on
how to dispose of the worn-out product .
The product is recyclable, subject to
extended producer responsibility and
is collected separately .
GB │ IE │ 9 ■