Chicco KEYFIT Mode D'emploi page 30

Gr. 0+ 0-13 kg
Masquer les pouces Voir aussi pour KEYFIT:
Table des Matières

Publicité

Machine washable at 30°
Do not bleach
0° C
Do not spin dry
Do not iron
Do not dry clean
To fit / remove the sun canopy, press the two
locking / unlocking buttons, located on the
side, as shown in diag. 23.
HOW TO FIT THE CHILD CAR SEAT TO THE
STROLLER
The KeyFit child car seat can be fitted to Chic-
co strollers equipped with the standard hooks
(diag. 24).
Always check the type of hooks the stroller
is equipped with in the instructions booklet,
and whether they fit the child car seat.
14. Open the stroller following the instructions
provided in the stroller's booklet (diag. 25).
15. Raise the sun canopy of the stroller, if in
use (diag. 26).
16. Recline the backrest completely (diag. 27).
17. Unfasten the two side fabric protections,
as shown in diag. 28. WARNING! To use
the child car seat fitted to the stroller, the
bumper bar of the stroller must not be re-
moved.
18. Place the handle of the child car seat in a
vertical position, and fit the child car seat
onto the stroller, making sure that it is
locked on both sides (a click will be heard,
indicating that the child car seat is locked
correctly on both sides) (diag. 29).
19. To release the child care seat from the
stroller, it is sufficient to press the rear
orange button, as shown in diag. 30, and
to lift the child car seat holding it by the
handle
WARNING! The child car seat can be fitted to
the stroller also with the child sitting in the
seat, although the child's weight could make
the operations more difficult.
30

Publicité

Table des Matières
loading

Table des Matières