Safety Rules - Manutan 00408M Mode D'emploi

Failure to obey the instructions and safety rules in this manual may result in death
or serious injury.
1.1 Do Not Operate Unless:
1. You learn and practice the principles of safe machine operation contained in this
operating manual.
- Avoid hazardous situations.
- Always perform a pre-operation inspection.
- Always perform the function tests prior to use.
- Inspect the workplace.
- Only use the machine as a material lift.
2. You read, understand and obey:
- Manufacturer's instructions and safety rules
- Employer's safety rules and worksite regulations
- Applicable governmental regulations
1.2 To Avoid Hazardous Situations:
1. Fall Hazard
Do not use a personnel lifting platform or step.
2. Tip-over Hazards
- Do not overload the winch stacker.
- Do not raise the load unless the machine is on a firm, level surface.
- Do not move the machine with a raised load, except for minor positioning.
- Do not tilt the machine back with a raised load.
- Do not operate the machine in strong or gusty winds.
- Prior to use, check the work area for drop-offs, holes, bumps, debris, unstable
surfaces or other possible hazardous conditions.
- Do not subject the machine to horizontal force by raising or lowering a fixed or
overhanging load.
- User refer to prEN1005-3 for further guidance.
- If the load exceeds the actual operational capacity, the operator must be
assisted by one or more persons.
- The machine can be only used in the light environment of at least 50LUX.

1. Safety Rules

WARNING
3