Trouble Shooting For 00408M - Manutan 00408M Mode D'emploi

No. Trouble
1. Turn the handle, the
carriage does not lift up.
2. The carriage does not
self-lock after lifting up.
3. The carriage does not
descend after lifting up.
4. The carriage does not
move smoothly.
Troubles Shooting for 00408M
- The cable is improperly
installed or loose.
-The internal thread
of the chain pulley is
damaged.
- The friction plate is
worn.
- The interval between
nut bushing and friction
washer is too large.
- Ratchet and pawl are
worn and binding.
- The carriage is seriously
deformed with load
resulting from shock.
- The locking spring does
not work.
- The load is not correctly
centred.
Winch of 00408M
Cause
- Check the installing
position of the cable.
- Replace the chain
pulley.
- Replace the friction
plate.
- Adjust the interval.
- Replace the ratchet and
pawl.
- Correct the carriage or
replace the carriage.
- Replace the spring.
- Centre the load
correctly.
9
Action