Pre-Operation Inspection; Function Tests - Manutan 00408M Mode D'emploi

The operator should perform a visual inspection prior to each work shift to discover
if anything is wrong with a machine.
2.1 Be sure that the instruction manual is complete, legible and available for
reference.
2.2 Be sure that all decals are legible and in place.
2.3 Checking the following components or areas for damage and improperly
installed, loose or missing parts:
• Winch and Related Components.
• Base Components.
• Legs.
• Rollers.
• Frame.
• Cable Anchor.
• Cable and Pulleys.
• Casters.
• Forks.
• Brake System.
• Handle.
• Nuts, Bolts and Other Fasteners.
2.4 Check entire machine for:
• Dents or damage.
• Corrosion or oxidation.
• Cracks in welds or structural components.
2.5 Be sure that there is a minimum of 4 wraps of cable around the winch drum
when the carriage is fully lowered.
The operator must follow the step-by-step instructions to test all machine functions.
3.1 Test the Brake Operation
1. Press down on the foot pedal to lock the brake.
2. Push the machine. The machine should not move.
3. Pull up on the foot pedal to release the brake.
4. Push the machine. It should now move freely.

2. Pre-operation Inspection

3. Function Tests

5