Model
Capacity
Base width(outside) (cm)
Base width(inside) (cm)
Max.Boom Length (cm)
Min.Boom Length
Max.Hook Height
Min.Hook Height
Net Weight
1.
Use cranes only on a firm level; never use on soft ground.
2.
The load to be lifted should never exceed the rated capacity.
3.
Never operate the hydraulic power unit beyond its maximum stroke indicated
on the label.
4.
The capacity of the crane reduces as the jib extension is prolonged. Do not load
the crane beyond the rated capacity for each specified jib extension position as
indicated in the label.
5.
The load hook is provided with a latching mechanism. Ensure it works properly.
6.
To lift the load in a well balanced and stable way make sure the center of gravity
remains always inside the crane base.
7.
Never position any part of your body under the load.
8.
Do not allow the load to swing or drop violently when moving.
9.
The crane is not transportation device but in case the load has to be removed,
lower the load and jib extension to the lowest possible point before transporting.
The crane is not designed to sustain the load indefinitely, so when the operation
is finished make sure the load is fully lowered and supported on a firm surface.
10. Make a visual inspection before each use of the crane. Any crane which appears
to be damaged must be removed from service.
11. As an additional safety feature the crane is equipped with a valve to prevent the
unit from being overloaded. This unit must not be tampered with.
12. If these basic rules are not followed, injury to the user, the crane or the load being
lifted may result.
1. Specifications
(kg)
(cm)
(cm)
(cm)
(kg)
2. Safety Instructions
A047440
500
95
80
136
106
222.5
47
81
3
A047441
1000
95
80
136
106
222.5
47
103