Fuse Replacement - Monacor DMT-1010 Mode D'emploi

Fuse replacement

If a fuse is burnt, it is replaced by opening the housing
according to the battery replacement. The defective
fuse is to be replaced by a fuse 200 mA/250 V, quick
acting.
Specifications
Display . . . . . . . . . . . . 3
Ranges/Accuracy
DC V. . . . . . . . . . . . . . 200/2000 mV/20/200/
AC V . . . . . . . . . . . . . . 200/750 V, ±1.2 %,
DC A . . . . . . . . . . . . . . 2000 µA/20/200 mA/10 A,
Resistance . . . . . . . . . 200/2000 Ω/20/200/
Temperature . . . . . . . . -20° up to 150°C, ±3 %
Transistor test . . . . . . . HFE, 0-1000
1 / digits, LCD 13 mm
2
1000 V, ±0.5 %
40-450 Hz
±1 %,
200 µA, ±1 %
(only with DMT-1010/1020)
2000 kΩ, ±0.8 %
(only with DMT-1040)
(not DMT-1020)
®
19