Amana NGD5800DW Instructions Pour L'installation page 18

7.
Remove hinge and latch
Using a T25 screwdriver, remove the 3 TORX
®
securing the latch plate and latch backing plate and the
5 screws holding the hinge assembly in place.
8.
Reinstall hinge and latch on
opposite sides
Using a T25 screwdriver, reinstall the latch plate, latch
®
backing plate, and hinge assembly on the opposite sides
from which they were removed.
18
Latch
Hinge
screws
®
9.
Reinstall inner door assembly
Position the door with the inside of the door facing up.
Reinstall the 10 screws securing the inner door to the
outer door.
10.
Reinstall door on dryer
Using a T25 screwdriver, remove the 4 screws on the dryer.
®
Insert the tabs on the hinge into the mounting slot and slide
down to engage the top tab. Secure in place with the 4 T25
screws removed earlier.
Bottom
of door
®