Manual Operation - TERMA MOA BLUE Mode D'emploi

MOA Blue
Blue LEDs – temperature setting indicators
Temperature adjustment and
RGB LED – TIMER, schedule and Bluetooth
communication indicator
On/Off button and TIMER switch
MOA Blue electric heating element is
equipped with a radiator temperature sensor
(active by default!) and an additional room
temperature sensor that can be activated
by a mobile control application.
Turning on the unit for a specified period of
time does not mean that it will receive the
same maximum power at all times. The el-
ement when switched on, works at nominal
power level for a short time to reach pro-
grammed temperature and then periodical-
ly turns itself on and off, consuming just as
much energy as is needed to maintain the
set temperature taking into account exter-
nal conditions.
The heating element's construction, as well
as the physical characteristics of the heat-
ing medium, cause the lower radiator tubes
(especially the bottom two) to have a lower
temperature than the rest of the radiator –
this is perfectly normal.
EN
Bluetooth pairing
The device is equipped with a thermal fuse,
which in emergency situations protects
against exceeding critical temperatures (this
fuse may be damaged at the temperature
of 82° C – it refers in particular to heating el-
ements installed in radiators connected to
a central heating system).
The MOA can be operated using the but-
tons on the housing (see section Manual
Operation) or via a mobile device – smart-
phone, tablet (see section Remote Control).

Manual Operation

(a mobile operating device with installed
control application may, but does not need
to be in the range)
Press briefly the key to switch on the heat-
ing element.
13