Product Disposal - TERMA MOA BLUE Mode D'emploi

8. Follow the subsequent guidelines when
connecting the electrical installation:
a. Brown wire – live connection to the
circuit (L).
b. Blue wire – connect to neutral (N)
c. Yellow & green wire – earth connec-
tion (PE).
9. Before filling the radiator with heating me-
dium, ensure that the heating element is
fitted properly and that it is water tight.
10. In central heating system radiator must
be fitted with the valves enabling discon-
nection of the radiator from the rest of
the system.
11. The temperature of the heating agent in
the central heating system must not ex-
ceed 82° C!
12. For detailed installation hints – see the
last pages of this manual.
Notes prior to removal:
1. Before dismantling permanently, discon-
nect the heating element from the mains
and ensure that the radiator is not hot.
2. Be aware. A radiator filled with liquid can
be very heavy. When moving the radiator,
ensure that you take the necessary safe-
ty precautions.
12
3. Before disassembly, close the appropriate
valves and drain the radiator completely-
to avoid causing any damage.

Product disposal

This product should not be disposed of as
general waste but should be brought to the
appropriate collection point for recycling of
electric and electronic devices. This informa-
tion is provided by the sign on the product,
user manual and packaging. Information on
the appropriate point for used devices can be
provided by your local authority, product dis-
tributor or the store from where the product
was purchased. Thank you for your effort to-
wards protecting the environment.
Maintenance
• Always disconnect the device from elec-
tricity before you start cleaning the radi-
ator or heating element.
• Recurrently check level of the heating
medium inside the radiator.
• Clean the item with a dry or damp cloth
with a small amount of detergent with-
out any solvents or abrasive agents.