Use the
key to set the required temper-
ature level. It is possible to set 5 tempera-
ture levels that correspond to a tempera-
ture range of 30 ... 60° C when measuring
the internal radiator temperature or a range
of 15 ... 30° C when measuring the room
temperature.
Each short press of the
temperature setting from 1 to 5, the next
press returns the setting to level 1, and so on.
The number of lit up, blue diodes corre-
sponds to the selected temperature level
of the device.
TIMER mode
Press and hold the
2 hour TIMER, i.e. to dry a towel or warm
up a room. Single RGB LED will turn red.
14
key increases the
key to activate the
When the set time elapses, the heating el-
ement automatically returns to the settings
from before the activation of the timer func-
tion. With the TIMER function active, you
can freely modify the operating tempera-
ture (
key).
If the heating element was switched off pri-
or to timer start-up, the unit will switch it-
self off automatically after the time elapses.
Press briefly the key to stop the timer func-
tion at any time.
ANTI-FREEZE protection
When the appliance is not in use (either off
or scheduled to be off) but remains connect-
ed to the mains and the temperature in the
vicinity of the temperature sensor drops be-
low 6° C, the heating element will automati-
cally switch itself on to prevent the heating
medium inside the radiator from freezing.
Activation of this function is signaled by
a flashing middle blue LED.