Remote Control - TERMA MOA BLUE Mode D'emploi

Remote Control

The MOA Blue has a built-in and continu-
ously active Bluetooth Low Energy commu-
nication module for remote control of the
heating element, using popular mobile de-
vices – smartphones and tablets, both with
Android or IOS operating systems. The heat-
ing element is visible by other Bluetooth de-
vices and appears as MOA Blue Terma. You
may need to enter a default authorization
code: 123456.
To start the pairing mode in MOA, press and
hold for approx. 5 sec. Pairing mode is in-
dicated by a flashing single, blue RGB LED.
Pairing mode, when activated, lasts 30
seconds.
The blue RGB LED will light up each time an
active exchange of information between the
heating element and an external control de-
vice, takes place.
EN
TIMER mode
The control application allows the Timer to
be set for a period of 1 ... 240 minutes in
the full range of temperatures supported by
the heating element and any temperature
measurement method – either internal ra-
diator temperature or external room tem-
perature. Activation of the TIMER function
is indicated by a red RGB LED.
Automatic heating program
schedule
The control application allows you to program
many different 7-day work schedules and to
upload any of the programmed schedules
to the memory of any Blue heating element
paired with the mobile device (see Tutorial
in the control application). When uploading
a schedule to the heating element's mem-
ory, a message confirming the action ap-
pears on the portable device screen, but
does not yet indicate a change in the heat-
ing element's operating mode.
15