General Information - Hach LANGE 2100Q Instructions D'utilisation

Table of contents
Specifications on page 3

General information

on page 3
Installation on page 5
Specifications
Specifications are subject to change without notice.
Specification Details
Power requirement AC 100–240 V, 50/60 Hz to 9V/2A DC (with power or USB
+Power module)
4 AA alkaline batteries
Rechargeable NiMH (for use with USB+Power module)
Operating conditions 0 to 40 °C (32 to 104 °F)
General information
Revised editions are found on the manufacturer's website.
Safety information
N O T I C E
The manufacturer is not responsible for any damages due to misapplication or
misuse of this product including, without limitation, direct, incidental and
consequential damages, and disclaims such damages to the full extent permitted
under applicable law. The user is solely responsible to identify critical application
risks and install appropriate mechanisms to protect processes during a possible
equipment malfunction.
Please read this entire manual before unpacking, setting up or operating
this equipment. Pay attention to all danger and caution statements.
Failure to do so could result in serious injury to the operator or damage
to the equipment.
Operation on page 10
Replacement parts and accessories
on page 12
Make sure that the protection provided by this equipment is not impaired.
Do not use or install this equipment in any manner other than that
specified in this manual.
Use of hazard information
D A N G E R
Indicates a potentially or imminently hazardous situation which, if not avoided, will
result in death or serious injury.
W A R N I N G
Indicates a potentially or imminently hazardous situation which, if not avoided,
could result in death or serious injury.
C A U T I O N
Indicates a potentially hazardous situation that may result in minor or moderate
injury.
N O T I C E
Indicates a situation which, if not avoided, may cause damage to the instrument.
Information that requires special emphasis.
English 3