Lighting - ETNA ABE590 Série Mode D'emploi

MAINTENANCE

Lighting

• Remove excess water. Be careful to avoid damaging the filter.
• Remove the odor filters from the holders.
• Place the filters in the oven to dry for at least 60 minutes at a
maximum temperature of 80 °C.
• After drying, put the odor filters back into the holders.
It is important that the odor filters are properly dried before
replacing them.
This hood is fitted with a light system. This light system has to be
replaced by an authorized technician. Do not attempt to replace it
by yourself.
The lamp in this household appliance is only suitable for
illumination of this appliance. The lamp is not suitable for
household room illumination.
EN 9