Grease Filters; Carbon Filter; Lighting - ETNA A4510LRVS Mode D'emploi

MAINTENANCE

Grease filters

Carbon filter

Lighting

Removing the grease filters
Switch off the electricity! Remove the plug from the mains socket or
turn the switch in the meter cupboard to zero. Remove the three panels
(A4510L) or open the panel (A4515L). Pull the grease filter towards you
and tilt it forwards and down.
Replacing the carbon filter
The carbon filter must always be used if the cooker hood is not ducted.
1. Remove the three panels (A4510L) or open the panel (A4515L).
2. Remove the grease filters.
3. Attach the carbon filters to the filter.
4. Replace the grease filters.
Note:
• Saturation of the activated charcoal will eventually occur after
prolonged use, depending on the type of cooking and how
frequently the grease filter is cleaned.
• The carbon filter needs to be replaced at least every four months.
• The carbon filter cannot be washed for reuse. Saturated carbon is
not environmentally friendly. Change the filter regularly.
Changing the light bulbs
• Entfernen Sie die Abdeckkappe von der Lampe.
• Tauschen Sie die Halogenlampe gegen eine neue Lampe mit
maximal 20 Watt aus.
• Setzen Sie die Abdeckkappe wieder auf.
EN 9