Removing The Grease Filters; Replacing The Carbon Filter; Lighting - ETNA T4327E Mode D'emploi

MAINTENANCE
Grease filters
G
Carbon filter

Lighting

Removing the grease filters

Switch off the electricity! Remove the plug from the socket or switch
the electricity off at the mains. Remove the filters one by one, after
having disconnected the relative fastening elements.

Replacing the carbon filter

The carbon filter must always be used if the cooker hood is not ducted.
1. Remove the grease filter.
2. Attach the carbon filter
3. Put the grease filter into position.
Note:
• Saturation of the activated charcoal will eventually occur after more
or less prolonged use, depending on the type of cooking and how
frequently the grease filter is cleaned.
• In all cases it is necessary to replace the cartridge at least every
four months.
• DO NOT wash or reuse the carbon filter. Saturated carbon is not
environmentally friendly, change the filter regularly.
Changing the light bulbs
• Adjust the two locking knobs (F).
• Close the lamp glass and use the knobs (F) to lock it.
• Replace the bulb with a new max. 28 W bulb.
EN 7