Grease Filters; Lighting - ETNA AIP690WIT Mode D'emploi

MAINTENANCE
Grease filter

Lighting

Removing the grease filter
• Before you can remove the grease filter, you must open the edge-
extractor panel.
• Hook your fingers behind the panel and use your thumbs to lever it
away from the edge of the extractor hood.
• Flip the edge-extractor panel downwards.
• Take hold of the grease filter using the handgrip on the left and tilt
the front side of the filter downwards. Now lift the filter from the
hood towards you.
• Clean the grease filter.
• Put the filter back into place by first pushing the rear side into the
holder. Tilt the front side upwards. The filter is now once again in
place.
• Press the edge-extractor panel into place.
• The cooker hood is fitted with LED lighting.
• LED lamps guarantee you optimum lighting, a service life of up to
10 times longer than conventional lamps and energy savings of as
much as 90%.
• Contact the technical department when LED lighting needs to
be replaced.
EN 9