Alpine DVA-5200 Mode D'emploi page 55

Operating from the head unit's remote control unit
RUE-4185
Operating DVDs, video CDs and CDs
First see "Remote control operations" (page 54).
1
Press "SOURCE" , "AUDIO SEL" or "A. SEL"to set the CD (DVA-5200) mode.
The DVA-5200's power is on when the CD mode is selected, off when other modes are
selected.
2
To set the pause mode, press "
Press " " or "ENT" again to resume playback.
3
Press and hold "
(RUE-4185, RUE-4160)
Tilt and hold the joystick in left or right direction to make FF or RW opera-
tion. (RUE-4165)
c
4
Press " " or "
Tilt the joystick in left or right direction to make a track or chapter skip.
(RUE-4165)
Notes:
• For adjusting the volume and other basic operations, refer to the head unit's operating instructions.
• For video CDs with playback control (PBC), turn PBC off.
Do not operate or view the display while driving.
Warning
Drivers should not operate the product or view the display while driving. Doing so
could be distracting, leading to accidents. Always stop the vehicle in a safe place
before operating the product or viewing the display.
ENT
SOURCE
RUE-4160
c f
" or " " continuously to make FF or RW operation.
f
" to make a track or chapter skip. (RUE-4185, RUE-4160)
ENT
AUDIO
SEL
RUE-4165
" or "ENT".
ENT ENT
55