Adjust - Adjusting The Speaker Level - Alpine DVA-5200 Mode D'emploi

ADJUST – Adjusting the speaker level
ENTER
A.PROC
BAND
48
ADJUST –
Adjusting the speaker level
Select "ADJUST" under "Operat-
ing the digital audio processor
(optional)" on page 36.
Press "BAND" to switch the
"ADJUST" screen.
RETURN
Use the " 8 " or " 9 " key to select
"TEST TONE", then press "EN-
TER".
Use the " 8 " or " 9 " key to select
"ON", then press "ENTER".
Test tones are produced for two seconds
from each speaker.
Note: Test tones are not produced from the center
and rear speakers when these speakers are
set to "OFF".
or
or
DVD
Video CD
CD
BAND
ENTER
ENTER