Adjusting The Parametric Equalizer - Alpine DVA-5200 Mode D'emploi

Adjusting the para-
metric equalizer
Select "PARAMETRIC-EQ" under
"Operating the digital audio
processor (optional)" on page 36.
Use the " 8 " or " 9 " key to select
the band to be set, then press
"ENTER".
The band whose frequency is indicated in
yellow can be adjusted. The parametric
equalizer's setting screen consists of two
pages. Press "BAND" to switch between
pages 1 and 2.
or
Use the " 8 " or " 9 " key to adjust
the frequency, then press "EN-
TER".
or

Adjusting the parametric equalizer

Press " : " to select the band
width (Q-FACT), then press
"ENTER".
Use the " 8 " or " 9 " key to adjust
the band width, then press
"ENTER".
Press " : " to select the level (LV),
ENTER
then press "ENTER".
Use the " 8 " or " 9 " key to
adjust the level, then press
"ENTER".
BAND
Note: Press "RETURN" to return to the previous
Press "A.PROC" to
close the digital audio
processor screen and
ENTER
return to the playback
screen.
or
or
screen.
ENTER
ENTER
ENTER
ENTER
A.PROC
37