Introduction
About This Manual
Conventions used
This manual is divided into four chapters. This section explains the organization of
this manual.
Introduction
Describes the features and system configuration of the color video printer.
Operation
Describes actual printing once all connections and adjustments have been made, as
explained in the next chapter. You will be able to make various types of printouts
after reading through this chapter.
Installation and adjustment
Describes how to make connections and make adjustments using the menus
displayed on the video monitor. Once all connections and adjustments have been
made, there should be no need to perform these operations again during normal
printing operations. These operations must, however, be performed after
reinstalling, or if the picture quality degrades, or if adjustment becomes necessary
because the peripheral equipment is changed. Also covered is the use of the
printer's remote control unit (not supplied).
Others
Notes the precautions to be observed when using the printer, lists errors, warnings
and their handling, and explains troubleshooting. Also provided is information on
the locations and functions of parts and controls, and the on-screen messages and
menus used to operate the printer. Should you encounter any unfamiliar terms or
items while reading this manual, consult the index at the end of the manual.
Cross references
Throughout this manual you will find references to other sections of the manual
that contain related information.
Important note
Be sure to read the sections of the manual marked Note . They explain points that
you should be aware of to operate the printer correctly and prevent malfunctions.
Index
Use the index, in addition to the table of contents, to find information you need
when using the printer.
Monitor displays
Some monitor displays illustrated in this manual may differ slightly from the acutal
display. The operation of the printer, however, remains as described in this manual.
Note
Introduction
5