Technical Data; Before Starting - Matrix ELM 1800-420 Traduction De La Notice Originale

The machine may only be used only for its
prescribed purpose. Any other use going over
and above that is contrary to the designated use.
The user / operator is liable for any damages or
injuries of any kind that are caused by it and not
the manufacturer.
Important information regarding power
connection
The device is subject to the standard EN 61000-3-
11,
i.e. it is not intended for use in residential areas
in which power is supplied through a public
low-voltage supply system, because it may
cause disturbances in case of adverse network
conditions. (Voltage fluctuations).
The device may be used in industrial areas or
other areas in which the power is not supplied
via a public low-voltage supply system.
General safety measures
The user is responsible for installing and using
the equipment as per the specifications of
the manufacturer in a professional manner. If
electromagnetic interference is detected, it is the
responsibility of the user.
Warranty
The warranty period is 12 months for commercial
use, 24 months for consumers and begins with
the date of purchase of the device.

4. Technical data

Supply voltage:
power consumption:
Engine speed:
Cutting width:
Cutting height adjustment:
Grass catching basket volume:
Sound pressure level L :
pA
Uncertainty K :
pA
sound power level measured L
uncertainty K
sound power level guaranteed L
vibration on the handle a :
Uncertainty K:
Protection class:
Weight:
Danger!
Sound and vibration The sound and vibration
values have been ascertained as per the
standards EN ISO 3744, EN ISO 11201 and EN ISO
20643.
Restrict noise production and vibration to a
minimum!
• Use only flawless devices.
• Maintain and clean the device regularly.
• Adapt your mode of operation to the device.
• Do not overburden the device.
• Get the device checked if necessary,
• Turn off the device if it is not used.
• Wear gloves.
• Limit the operating period
Caution! Other risks
Even if you operate this power tool properly,
there will still be other risks. The following
risks may occur in the context of the design
and execution of this power tool:
1. Lung damage if no suitable dust protection
mask is worn.
2. Ear damage if no suitable ear protection is
worn.
3. Health risks, which take place due to hand-arm
vibrations, if the device is used for a longer period
or if it is not properly handled or maintained.
230-240 V ~ 50Hz
1800 W

5. Before starting

-1
3600 min
42 cm
20-70 mm; 6-stage Before connecting, make sure that the data on
40 Litres the type-plate corresponds with the network
86 dB(A) data.
2.5 dB(A)
: 92.41 dB(A)
WA
:
WA
:
WA
2.345 m/s
2.5 dB(A)
96 dB(A)
2
2
1.5 m/s
II /
14,2 kg
47