Inspection Procedure; Elimination - Matrix ELM 1800-420 Traduction De La Notice Originale

11. Inspection Procedure

Error
a) Capacitor defective
Motor does not
b) No power in the plug
start
c) Cable defective
d) Defective switch plug
combination
e) Connections at the
engine or capacitor loose
f) ) Device stops in tall grass
g) Clogged mower housing
a) Too high or too damp grass
The motor
b) Clogged mower housing
performance
c) Badly worn blade
drops
a) Worn blade
Ragged cut
b) Incorrect cutting height
Possible cause

Elimination

a) by customer service workshop
b) Check cable and
c) fuse
d) by customer service workshop
e) by customer service workshop
f) ) Start in low grass or already cut areas;
later change the cutting height
g) Clean the housing so that
the blade works freely
a) Please correct the cutting height
b) Clean the housing
c) Replace blade
a) Replace or re-sharpen knives
b) Please correct the cutting height
53