Disposal And Recycling - Matrix ELM 1800-420 Traduction De La Notice Originale

attention to the mounting direction of the blade .
The wind vane of the blade must be projected
into the motor compartment (see Image 13). The
mounting domes must be in accordance with the
punch holes in the blade.
4. Subsequently, tighten the fastening screw
again with the universal key. The tightening
torque should be about 25 Nm.
At the end of the season , please carry out a
general inspection of the lawn mower and
remove any accumulated debris. Before the start
of each season, check the condition of the blade
without fail. If any repairs are to be done, please
contact our customer service department. Use
only original spare parts.

9. Disposal and recycling

The device is in a packaging, to prevent damage
during transport. This packaging is raw material
and can therefore be reused or can be returned
to the raw material cycle. The device and its
accessories are made of various materials, such as
metal and plastics.
Defective equipment may not be disposed of
in the domestic waste. For proper disposal, the
device should be returned to a suitable collection
point. If you do not know of any collection
points, please inform yourself at the town hall.
10. Storage
Store the device and its accessories in a dark,
dry and frost-free place. The optimum storage
temperature is between 5 and 30 ° C. Keep the
power tool in its original package.
52