Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 21
TC07DC
6
Operation
I
NOTE
Before starting your new cooling device for the first time, you
should clean it inside and outside with a damp cloth for hygienic
reasons (please also refer to the "Cleaning and care" on page 18).
6.1

Energy saving tips

 Choose a well ventilated installation location which is protected against
direct sunlight.
 Allow warm food to cool down first before placing it in the device to keep
cool.
 Do not open the cooling device more often than necessary.
 Do not leave the cooler unit open for longer than necessary.
6.2
Switching on the cool box
➤ Place the coolbox on a firm base.
I
NOTE
The plug's polarity cannot be reversed: it can only be inserted into
the socket in one direction (see fig. 2 A, page 3).
➤ Connect the cooler to the cigarette lighter in your vehicle using the
connection cable supplied (see fig. 3, page 3).
➤ Push the switch on the operating panel (see fig. 2 C, page 3) into
the "HEISS/HOT" position or the "KALT/COLD" position to switch the
coolbox on.
✓ The cool box starts cooling/heating the interior.
Operating display
Red (see fig. 2 B, page 3)
Green (see fig. 2 D, page 3)
A
NOTICE!
Ensure that the objects placed in the cool box are suitable for
cooling/warming to the selected temperature.
EN
All manuals and user guides at all-guides.com
Operating mode
Heating
Cooling
Operation
17

Publicité

Table des Matières
loading

Table des Matières