Wall Mounting - Doro AFTI 25 Manuel D'utilisation

English
Batteries
To ensure the display, memories, Caller ID, clock and other
functions operate, three good quality AAA 1.5V alkaline batteries
must be installed. When the batteries are running low, the
symbol will be visible in the display. Replace the batteries as soon
as possible! The battery compartment is located on the back of the
handset.
1. Ensure the telephone line cord is disconnected from the
telephone network wall socket.
2. Remove the battery cover.
3. Install the batteries ensuring correct battery polarity is observed.
4. Replace the battery cover.
Connection
Once the batteries have been installed.
1. Connect the telephone line cord to the telephone network wall
socket.
2. A click will be heard when the modular plug is correctly in place.
3. Press and listen for the dial tone. Your telephone is now
o
operational
4. Press
l
5. To set the time and date please refer to page 12.

Wall Mounting

1. Secure two screws, vertically positioned 100 mm apart.
2. Position the wall mount bracket on top of the screws and slide
it downward into place.
The telephone can now be placed in the wall socket after terminating
the call using
l
4
Installation
to terminate the call.
.
www.doro.com