SMA Plug-in Grounding Instructions Pour L'installation page 32

Inspecting and Replacing the fuse of the SMA Plug-in Grounding
9. If the negative terminal of the PV plant is to be
grounded:
– Connect the SMA Plug-in Grounding to the
terminal socket in such a way that the symbol
" − " of the cap is at the front of the cap.
– Push SMA Plug-in Grounding upwards until it
clicks into place.
10. If the positive terminal of the PV plant is to be
grounded:
– Connect the SMA Plug-in Grounding to the
terminal socket in such a way that the symbol
"+" of the cap is at the front of the cap.
– Push the SMA Plug-in Grounding upwards until
it clicks into place.
☑ The fuse of the SMA Plug-in Grounding has been replaced.
32 Erdung_HF-IXX105020
SMA Solar Technology AG
Installation Guide