Ascaso Steel Manuel De L'utilisateur page 33

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

a liquid consistency if the filter holder
is immediately removed
delivery.
If pods or FAP-capsules are used:
Use the specific filter holder for
capsules or pods. Place the pod in
the filter holder (see figure 4). Follow
points 1, 2, 5, 6 and 7 as in the
previous section.
Pod (fixed filter holder)
Proceed as follows:
1. Follow Points 1 and 2, as in the
section for ground coffee.
2. Place a tablet on the filter holder
and turn it gently to the right as
far as it will go. Do not force it,
closure is smooth. (See figure 5).
3. Point 5, 6, 7 and notes as in the
previous section.
NB!
Do not remove or turn the
filter holder while the water is running
through, as the machine is under
pressure at this time.
General tips:
1. The filter holder
be fitted in the machine
it warm. In the closed position.
2. Only in UNO models. If the
coffee does not come out hot
enough, turn on the steam switch
3 for 10 seconds. This raises
the temperature of the machine.
increases the working pressure
and turning to the left reduces it.
3. Place the cups on the cup warmer
after
7
Figure 5
should always
7
to keep
8
. Espresso is best at optimal
9
temperature (40°C/105°F). (See
figure 6)
4. The coffee will continue to drip out
for a few seconds after the coffee
is switched off.
NB! Tamping:
perfect espresso, the coffee should
be firmly tamped down.
NB! Pressure gauge:
right working pressure depends on
the type of coffee and the ground
size. In all cases, a working pressure
of between 9 and 12 bar is adequate.
In the PID versions, the temperature is
shown on the screen
this purpose.
NB!
The machine working
pressure can be adjusted using the
OPV
next to the coffee group
10
To do this, use the blind filter fitted
in the filter holder
7
the group
and turn on the coffee
8
switch
. The pressure can be
2
adjusted by turning the OPV
a flat-head screwdriver. Turning to
the right
NB!
In machines that are not fitted
with a pressure gauge as standard,
use the corresponding pressure tester
accessory (not included) to carry out
this procedure.
Figure 6
ascaso
To obtain
The
24
included for
.
8
, attach it to
using
10
33

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Steel pidSteel pid unoSteel pid duoSteel pid trioSteel duoSteel duo pid ... Afficher tout

Table des Matières