Important; Technical Data - Matrix TRS 1200-56 Traduction De La Notice Originale

8.6 Cutting with rails (Fig. 14)
• Place the machine in the guide rails.
•
switch (4).
• Press the saw downwards to reach the sawing
and thus splitter protection is guaranteed up to
the saw blade.
• Push the saw uniformly forwards.
•
the top when the saw cutting is complete.
8.7 Sawing with dust suction (Fig. 15)
Connect the suction hose to the exhaust nozzle -
35mm (10) or 32mm with Reducer adaptor(18).
8.8 Carbon Brush Replacement (Fig.16)
• Remove and check the carbon brushes
regularly.
• Both carbon brushes should be replaced at the
same time. Use only identical carbon brushes.
• Use a screwdriver to remove the housing in the
end of the motor
• Use a screwdriver to remove the clamp over the
carbon brushes
• Take out the worn carbon brushes, insert the
new ones and tight the clamp, then fixing the
housing in the end of the motor.

9. Technical data

Mains voltage:
Power input:
Idling speed:
Mitre angle:
Cutting depth at 90°:
Cutting depth at 45°:
Saw blade:
Protection class:
Weight:
Sound and vibration
Sound and vibration values were measured in
accordance with EN 60745.
L : sound pressure level 89.9 dB(A)
pA
K : uncertainty 3 dB(A)
pA
L : sound power level 100.9 dB(A)
WA
K : uncertainty 3 dB(A)
WA
The impact of noise can cause damage to
hearing.
Total vibration values (vector sum of three
directions) determined in accordance with EN
60745.
Handle
Vibration emission value a
K uncertainty = 1.5 m/s
The vibration value changes according to the
area of application of the electric tool and
circumstances.
Keep the noise emissions and vibrations to a
minimum.
• Only use appliances which are in perfect
working order.
• Service and clean the appliance regularly.
• Adapt your working style to suit the appliance.
• Do not overload the appliance.
230~ /50 Hz
1200 W
• Have the appliance serviced whenever
-1
5200 min
necessary.
0°–45°
56 mm
•
42 mm
Ø 165 x Ø 20 mm
• Wear protective gloves.
II /
apprx. 4.75kg
= 2.663 m/s
h,W
2

Important!

2
33