Intended Use; Important Information - Scheppach MFB4-40Li SE Traduction Des Instructions D'origine

Fig. 1 + 2
• Motor drive unit
• Pole saw
• Hedge trimmer
• Power scythe
• Grastrimmer
• Hexagon wrench, size 19/13 (20)
• Allen key (size 4) (21)
• Allen key (size 5) (22)
• Belt (23)
• Front handle
• 4 screws M5 x 35
• Cover
• 4 nuts M5
4.

Intended use

The brush cutter (using the cutting blade) is designed
for cutting young trees, strong weeds
and undergrowth.
The power trimmer (using the line spool with cutting
line) is designed for cutting lawns, grassed areas and
small weeds.
The hedge trimmer is suitable for cutting hedges,
bushes and shrubs.
The pole-mounted powered pruner is designed for
lopping off tree branches. It is not suitable for exten-
sive sawing work, felling trees or sawing any materi-
als other than wood.
The operating instructions as supplied by the man-
ufacturer must be obeyed to ensure that the equip-
ment is used properly. Any use which is not express-
ly permitted in the manual may result in damage to
the equipment and place the user in serious danger.
Be sure to observe the restrictions in the safety in-
structions.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial appli-
cations. Our warranty will be voided if the equipment
is used in commercial, trade or industrial businesses
or for equivalent purposes.
Important. Due to the high risk of bodily injury to the
user, the power scythe must not be used to carry out
the following work: to clean dirt and debris off walk-
ways, or to chop up tree or hedge clippings.
The equipment is allowed to be used only for its pre-
scribed purpose. Any other use is deemed to be a
case of misuse. The user/operator and not the man-
ufacturer will be liable for any damage or injuries of
any kind resulting from such misuse.
Non-permitted users:
People who are not familiar with the operating manu-
al, children under the age of 16 and people under the
influence of alcohol, drugs and medication, as well as
those who are tired or ill.
32 | GB
 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58
5.

Important information

m WARNING! Read all safety warnings and all
instructions. Failure to follow the
warnings and instructions may result in electric shock,
fire and/or serious injury.
Save all warnings and instructions for future ref-
erence.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-oper-
ated (cordless) power tool.
Work area safety
• Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
• Do not operate power tools in explosive atmo-
spheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
• Keep children and bystanders away while ope-
rating a power tool. Distraction can cause you to
lose control.
Electrical safety
• Power tool plugs must match the outlet. Never mo-
dify the plug in any way. Do not use any adapter
plugs with earthed (grounded) power tools. Unmo-
dified plugs and matching outlets will reduce risk of
electric shock.
• Avoid body contact with earthed or grounded sur-
faces, such as pipes, radiators,ranges and refrige-
rators. There is an increased risk of electric shock
if your body is earthed or grounded.
• Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
• Do not abuse the cord. Never use the cord for car-
rying, pulling or unpluggingthe power tool. Keep
cord away from heat, oil, sharp edges or moving
parts. Damaged or entangled cords increase the
risk of electric shock.
• When operating a power tool outdoors, use an exten-
sion cord suitable foroutdoor use. Use of a cord suita-
ble for outdoor use reduces the risk of electric shock.
• If operating a power tool in a damp location is un-
avoidable, use a residual current device (RCD) pro-
tected supply. Use of an RCD reduces the risk of
electric shock.
Personal safety
• Stay alert, watch what you are doing and use com-
mon sense when operating a power tool. Do not
use a power tool while you are tired or under the in-
fluence of drugs, alcohol or medication. A moment
of inattention while operating power tools may re-
sult in serious personal injury.