Safety Warnings - Marmitek LWM1 Guide Utilisateur

Masquer les pouces Voir aussi pour LWM1:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 35
LWM1™
BUILT-IN DIMMER MODULE

SAFETY WARNINGS

• The wiring of your electrical installation is live (230 V) and
extremely dangerous. Never connect the module when
plugged into the mains. Always turn off the main switch
before starting the installation.
• This product is for professional use and should be installed by
a certified installer.
• To prevent short circuits, this product should only be used
inside and only in dry spaces. Do not expose the components
to rain or moisture. Do not use the product close to a bath,
swimming pool etc.
• Do not expose the components of your systems to extremely
high temperatures or bright light sources.
• Do not open the product: the device contains live parts. The
product should only be repaired or serviced by a qualified
repairman.
• In case of improper usage or if you have opened, altered and
repaired the product yourself, all guarantees expire. Marmitek
does not accept responsibility in the case of improper usage of
the product or when the product is used for purposes other
than specified. Marmitek does not accept responsibility for
additional damage other than covered by the legal product
responsibility.
• This product is not a toy. Keep out of reach of children.
• Automatic switching devices provide comfort, but can also be
dangerous. They can surprise people or can ignite clothing
hanging over an electric heat source. Please be careful and
take appropriate measures to avoid accidents.
LWM1
TM
3

Publicité

Table des Matières
loading

Table des Matières