Marmitek LWM1 Guide Utilisateur page 8

• Can respond to All Lights On and All Off (configuration).
• Choice between 1-way momentary switch or 2-way
momentary switch.
Explanation about connecting switches:
Note: In the standard setting the LWM1 module assumes a
'2-way momentary switch' has been connected.
"1-way momentary switch":
Push to make switch without intermediate setting. 1
short press is ON, keeping the button pressed is DIM,
second press is OFF. When connecting this type of
switch, the brown and red wires are connected to the
impulse contact of the switch. The blue wire is
connected to the P or L contact of the switch.
Colour coding for the 1-way momentary switch:
Connect Red and Brown: alternating ON/BRIGHTER and OFF/DIM.
Blue: "COMMON".
Blue
Red
Brown
8
P
PROG.
LWM1
N
L
Phase 230V
Load
Neutral
© MARMITEK