Technical Data; Dimensions - Marmitek LWM1 Guide Utilisateur

TECHNICAL DATA

Power:
Capacity:
X-10 Key codes:
X-10 transmisson:
Switch use:
Connection reach:
Fuse:
Environment temperature:

Dimensions:

Environmental Information for Customers in the European Union
European Directive 2002/96/EC requires that the equipment bearing this symbol
on the product and/or its packaging must not be disposed of with unsorted
municipal waste. The symbol indicates that this product should be disposed of
separately from regular household waste streams. It is your responsibility to dispose of this
and other electric and electronic equipment via designated collection facilities appointed by
the government or local authorities. Correct disposal and recycling will help prevent
potential negative consequences to the environment and human health. For more detailed
information about the disposal of your old equipment, please contact your local authorities,
waste disposal service, or the shop where you purchased the product.
LWM1 TM
230V - 50Hz.
250W/230V with temperature and
mounting restrictions.
120W/230V light bulbs.
100W Low voltage halogen lighting
with wound voltage transformer.
120W Low voltage halogen lighting
with electronic voltage transformer.
(recommended voltage transformer:
Osram HTM series. If you use other
voltage transformers, we advise you
to test the combination before
building in the system).
Softstart/Softdim.
Memory reading for dim level
All units Off, All Lights On, On, Off,
Dim, Bright, Extended Code 1 type
3, Pre-Set Dim, Status Request.
1 pulse on 0° and 180°.
1 or 2 way momentary switch.
Till 2.5 mm2
Radial lead micro fuse, 1.6AT, 250V.
-10°C to +35°C (operation)
-20°C to +70°C (storage).
46x46x16mm.
17