Marmitek LWM1 Guide Utilisateur page 16

Programming the LWM1 through the IRRF7243 is not
working.
If you wish to program the module with the help of a remote
control and the IRRF7243 you need to follow a slightly different
procedure (Example: setting UnitCode 2 with an 8in1 Multimedia
remote control):
• push the "house" on the remote control.
• push button [2].
• give an [on] command 2 times.
• close off with button [2].
The last action is only necessary when using the IRRF7243. When
using a TM13 or an alarm central, the address will already be
altered with the second on- command.
Can I connect a two-way switch to the LWM1?
No, you can only connect a Momentary switch to the LWM1. For
two-way switches you can use the AWM2 although you cannot
dim with this one.
Can I use several switches to control the LWM1?
Yes, you can connect more switches parallel to the first switch.
They do have to be all 1-way momentary switches or all 2-way
momentary switches.
My LWM1 is getting warm.
Because of the micromodules' small size, they become warmer
than the 'larger' Marmitek Home Automation components.
However, this is nothing to worry about.
Do you still have questions? Please check out
www.marmitek.com for more information.
16 © MARMITEK