Safety Warnings - Marmitek AWM2 Guide Utilisateur

MARMItEk MICROMODULE AWM2
Marmitek X-10 transmitter for 2 addresses with a built-in
appliance module.

sAFeTY WARNiNgs

• The wiring of your electrical installation is live (230 V) and
extremely dangerous. Never connect the module when plugged
into the mains. Always turn off the main switch before starting
the installation.
• This product is for professional use and should be installed by a
certified installer.
• To prevent short circuits, this product should only be used inside and
only in dry spaces. do not expose the components to rain or moisture.
do not use the product close to a bath, swimming pool etc.
• do not expose the components of your systems to extremely
high temperatures or bright light sources.
• In case of improper usage or if you have altered and repaired
the product yourself, all guarantees expire. Marmitek does
not accept responsibility in the case of improper usage of the
product or when the product is used for purposes other than
specified. Marmitek does not accept responsibility for additional
damage other than covered by the legal product responsibility.
• This product is not a toy. Keep out of reach of children.
• do not open the product: the device may contain live parts.
The product should only be repaired or serviced by a qualified
repairman.
• Automatic switching devices provide comfort, but can also
be dangerous. They can surprise people or can ignite clothing
hanging over an electric heat source. Please be careful and take
appropriate measures to avoid accidents.
hOW dOes MARMiTeK X-10 WORK?
Marmitek X-10 components use the existing mains wiring to
communicate (using Marmitek X-10 signals). You can build a
complete system using the three different kind of components of
the Marmitek X-10 System:
AWM2™ 3