Limitations On Use; Choosing The Correct Size; Casting/Scanning The Socket With The Casting Dummy - Blatchford Silcare Breathe Locking Liner Instructions D'utilisation

6 Limitations on Use

Intended life
A local risk assessment should be carried out based upon activity and usage.
Environment
Avoid exposing the device to corrosive elements such as acids, industrial detergents, bleach or
chlorine. The use of creams or lotions with this device should be used with caution as these can
cause the device to soften and overstretch or distort.
Keep away from sharp objects (such as jewellery, fingernails).
Exclusively for use between -15 ˚C and 50 ˚C (5 ˚F to 122 ˚F).

7 Choosing the Correct Size

It is important that the correct size is specified to
ensure proper fit and comfort in use.
1. Measure the circumference of the residual limb
4 cm up from its distal end.
2. If the circumference of the residual limb matches
one of the sizes in the table, choose the next size
down.
3. If the circumference of the residual limb is between
one of the sizes in the table, choose the smaller
size.
22
Valve Size

8 Casting/Scanning the Socket with the Casting Dummy

When casting the socket, use the casting dummy to make sure that the distal end of the socket
has space for the valve to open. Otherwise, moisture will collect inside the device.
Before you begin
Allow the user to wear the device for 10 minutes.
(See Donning the Device section.)
23.5 25 26.5
Small Medium
Size (cm)
28 30 32
Large
7
4 cm
34 36 40
Extra Large
938413
938398PK1/1-0521