Limitations On Use - Blatchford Blade BXTAG1SF-BXTAG9SF Instructions D'utilisation

6 Maintenance (cont.)
The instructions in this section are for practitioner use only.
It is recommended that the following maintenance is carried out annually:
• Check the sole cover for damage or wear and replace the Heel Spring assembly if necessary.
• Check all bolts for tightness, clean and reassemble as necessary.
• Visually check both the Heel and Toe blade springs for signs of delamination or wear and
replace if necessary. Some minor surface damage may occur after a period of use, this does
not affect the function or strength of the foot.
The user should be advised of the following:
• Beware of slip hazard at all times especially on wet/smooth surfaces.
• Any changes in performance of this device must be reported to the practitioner
e.g. reduced energy return, unusual noises or softening of the toe or heel.
• The practitioner must also be informed of any changes in body weight and/or activity level.
• Excessive wear of the sole cover could lead to loss of grip.
• Excessive wear or damage to the spring elements could lead to structural failure.

7 Limitations on Use

Intended Life
A local risk assessment should be carried out based upon activity and usage.
Lifting Loads
User weight and activity is governed by the stated limits.
Load carrying by the user should be based on a local risk assessment.
Environment
This device is waterproof to a maximum depth of 1 meter.
Thoroughly rinse this device with fresh water after use in abrasive environments such as those
that contain sand or grit, for example, to prevent wear or damage.
Thoroughly rinse with fresh water after use in salt or
chlorinated water.
Exclusively for use between -15 ˚C and 50 ˚C (5 ˚F to
122 ˚F).
8
938345PK1/1-0521