Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
ADDITIONAL SAFETY INSTRUCTIONS
FOR WIRE BRUSHING OPERATIONS
Safety Warnings Specific for Wire
Brushing Operations:
a.
Be aware that wire bristles are thrown
by the brush even during ordinary
operation. Do not overstress the wires
by applying excessive load to the
brush. The wire bristles can easily pene‑
trate light clothing and/or skin.
b.
If the use of a guard is recommended
for wire brushing, do not allow any
interference of the wire wheel or brush
with the guard. Wire wheel or brush may
expand in diameter due to work load and
centrifugal forces.
SAFETY INSTRUCTIONS FOR SANDERS
When using electric tools, basic
safety precautions should always be
followed to reduce the risk of fire,
electric shock and personal injury.
Read all these instructions before
attempting to operate this product
and save these instructions.
Before using the appliance
Check the following:
•
Make sure the voltage corresponds to the
type label on the unit.
•
Persons with limited physical, sensorial or
mental abilities are not allowed to use the
unit, unless they are supervised for their
safety by a qualified person.
•
The sander may not be used in damp
environment. Attention: The sander is not
designed for wet sanding.
•
Secure the work pieces to avoid slipping.
•
Always lay down the sander before the
moving parts have come to complete stop.
•
Always attach the dust bag or a vacuum
cleaner to the dust extraction flange while
working with the sander. Make sure that
the integrated dust extraction system is
functioning.
•
The dust forming during operation may be
hazardous to your health, combustible or
explosive. Take the necessary precautions
as:
7062243_MaxxRoll_Ma_#1506-19.indb 19
Always wear hearing protection.
Wear a dust mask.
•
Attention: Please note that poisonous
dust may be formed e. g. when sanding
paint, which contains lead, while process-
ing some kinds of wood or metal. Always
use a dust extraction device and a dust
mask.
•
Only use extension cables which are
approved for outdoor operation.
•
In the case of a malfunction please do not
attempt to repair the machine yourself.
Contact the customer support department
or have it repaired by a professional.
ELECTRICAL SAFETY
When using electric machines always observe
the safety regulations applicable in your coun-
try to reduce the risk of fire, electric shock and
personal injury. Read the following safety
instructions and also the enclosed safety
instructions.
Always check that the power supply
corresponds to the voltage on the
rating plate.
Class II machine – Double insulation
– You don't need any earthed plug.
Replacing cables or plugs
If the power cord is damaged, it must be
replaced by the manufacturer or its service
agent or a similarly qualified person, in order to
avoid a hazard.
Immediately throw away old cables or plugs
when they have been replaced by new ones. It
is dangerous to insert the plug of a loose cable
in the wall outlet.
Using extension cables
Only use an approved extension cable suitable
for the power input of the machine. The mini-
mum conductor size is 1.5 mm
cable reel always unwind the reel completely
Inadequate extension cords can be danger-
ous. If an extension cord is used, it shall be
suitable for outdoor use, and the connection
has to be kept dry and off the ground. It is
recommended that this is accomplished by
English
. When using a
2
19
08-09-15 11:05
.
Publicité
Table des Matières
