Ec Declaration Of Conformity; Disposal And Recycling - Batavia MAXXROLL BT-SR001 Mode D'emploi

Wear hearing protection while
operating the power tool.
The declared vibration total value has been
measured in accordance with a standard test
method and may be used for comparing one
tool with another.
The declared vibration total value may also be
used in a preliminary assessment of exposure.
Warning
The vibration emission during actual use of the
power tool can differ from the declared total
value depending on the ways in which the tool
is used.
There is the need to identify safety measures
to protect the operator that are based on an
estimation of exposure in the actual conditions
of use (taking account of all parts of the
operating cycle such as the times when the
tool is switched off and when it is running idle
in addition to the trigger time).

DISPOSAL AND RECYCLING

Do not dispose of electric power
tools with domestic refuse.
The electric power tool is shipped in
packaging to reduce transport damage. This
packaging is a raw material and as such can
either be reused or can be fed back into the
raw material cycle. The electric power tool and
its accessories are made from various materi-
als such as metals and plastics. Take defective
components to a special refuse collection
point. Ask about these at your specialist shop
or local council.
The product and the user manual may be
subject to changes. Technical data may be
changed without prior notice.
7062243_MaxxRoll_Ma_#1506-19.indb 23
EC-DECLARATION OF CONFORMITY
We, the Batavia GmbH, Weth. Buitenhuis-
straat 2a, NL-7951 SM Staphorst, declare by
our own responsibility that the product Maxx-
Roll, Model BT-SR001, Item-No 7062243, is
according to the basic requirements, which are
defined in the European Directives Electro-
magnetic Compatibility 2004/108/EC
(EMC), 2006/42/EC (Machinery) and their
amendments. For the evaluation of conformity,
the following harmonized standards were
consulted:
EN 60745-1;
EN 60745-2-3;
EN 55014-1;
EN 55014-2;
EN 61000-3-2;
EN 61000-3-3
Staphorst, 04 August 2015
Technical documentation kept by:
Meino Seinen, QA Representative
Batavia GmbH, Weth. Buitenhuisstraat 2a,
7951 SM Staphorst, Netherlands
.
English
23
08-09-15 11:05