Explanation Of The Symbols; Additional Safety Warnings For Sanders - Batavia BT-CDS001 Mode D'emploi

Dear customer
This multi sander is intended for dry sand-
ing. It can be used for grinding flat wood,
metal, or filler surfaces, for stripping rust or
paint and for sanding basecoat.
Please familiarize yourself with the proper
usage of the device by reading and following
each chapter of this manual, in the order
presented. Keep these operating instruc-
tions for further reference.
Please read all safety instructions!
This manual contains important information
on operating and handling the device. Keep
these operating instructions for further
reference. Please pass it on along with the
unit if it is handed over to a third party.
Battery and charger not included!
The battery is available separately under art.
No: 7062517 (2Ah), 7062518 (4Ah) or
7063735 (5Ah). The charger is available
separately under art. No: 7063630 (1,65A),
7063688 (2,4A), 7062519 (3A) and 7063554
(4A). These items are available online and in
participating stores.

1. Explanation of the symbols

The following symbols are used in the user
manual or on the product:
Warning! To reduce the risk of
injury, the user must read the
instruction manual.
Denotes risk of personal injury,
loss of life or damage to the tool in
case of non-observance of the
instructions in this manual.
Always wear hearing protection.
The effects of noise can cause
hearing loss.
Wear a dust mask. When working
with wood and other materials,
harmful dust may be generated.
Work with asbestos containing
materials is not permitted!
Wear safety glasses. When work-
ing with electric power tools,
sparks, splinters, chips and dust
particles may be generated and
these can cause loss of sight.
CE stands for "Conformité
Européenne", which means "In
accordance with EU Regulations".
With the CE marking, the manufac-
turer confirms that this Electric
tool complies with the applicable
European directives.
Do not dispose of electric power
tools with domestic refuse.
2. Additional safety warnings for
sanders
Contact with or inhalation of dust
coming free during use (e.g. lead-
painted surfaces, wood and metal)
can endanger your health and the
health of bystanders. Always wear
appropriate protective equipment,
such as a dust mask. Always use
proper dust extraction during use.
• Do not work materials containing asbes-
tos. Asbestos is considered
carcinogenic.
• Do not use the machine for sanding
magnesium workpieces.
• Wear safety goggles. Wear hearing pro-
tection. If necessary, use other protective
means, such as safety gloves, safety
shoes, etc.
• Be very careful when sanding painted
surfaces.
• Before use, remove all nails and other
metal objects from the workpiece.
• Make sure that the workpiece is properly
supported or fixed.
• Only use sanding paper that is suitable
for use with the machine.
• Only use sanding paper with the correct
dimensions. Make sure that the sanding
paper is properly mounted.
• Inspect the sanding paper before each
use. Do not use sanding paper that is
worn because of prolonged use.
• Never put the machine down on a table
or a workbench before it has been
switched off.
English
5